Les paquets et cartes Home Assistant entrent enfin dans l historique

Treize paquets et dix-sept cartes n existaient qu en un seul exemplaire vivant
sur le partage de 10.10.10.17. La sauvegarde quotidienne les couvre contre la
perte, mais elle ne donne ni diff ni historique : le retrait des initial: du
06/09, les helpers de la reserve d orage, la politique batterie dynamique, la
carte du conseiller reecrite hier n avaient aucune trace de leur evolution.

⚠️ Ce sont des COPIES. La source de verite reste le partage — c est l inverse
de src/nodes/, et le LISEZMOI le dit en tete pour qu une prochaine session
n edite pas la copie en croyant changer l installation.

Verifie avant de verser : aucun identifiant en clair. Le paquet du bilan ne
porte que la DECLARATION de la cle Forecast.Solar, en mode password ; sa valeur
vit dans .storage, qui n entre pas ici.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GwpFpy2aQ2rJok6tNQSbVj

ha-configuration.yaml

@@ -0,0 +1,407 @@
+# Loads default set of integrations. Do not remove.
+default_config:
+
+homeassistant:
+  packages: !include_dir_named packages
+
+# Retention de l'historique brut (24/08/2026) : 10 jours par defaut -> 90 jours.
+# Motif : pouvoir rejouer un incident plusieurs semaines apres coup. Les incidents
+# EDF/EVCS de juillet-aout n'ont pas pu etre reconstitues finement faute d'historique.
+# NB : les statistiques long terme (sommes horaires, base du bilan energetique) sont
+# deja conservees SANS limite et ne dependent pas de ce reglage.
+# Dimensionnement : 10 jours ~= 2,6 Go, donc 90 jours ~= 23 Go (volume1 : 5 To libres).
+
+# =====================================================================
+# HISTORISATION LONGUE — InfluxDB sur 10.10.10.22 (ajoute le 04/09/2026)
+# L'historique brut ci-dessous (recorder) tient ~20 jours pour 5 Go ; les
+# statistiques long terme ne gardent que des moyennes horaires. InfluxDB
+# garde le detail, sur la duree, hors de cette machine.
+# Details et mise en service : deploy/historisation/README.md du depot EVCS.
+# =====================================================================
+influxdb:
+  # Pourquoi une liste plutôt que « tout » : la maison publie ~1,14 M états par
+  # jour, dont l'essentiel n'a aucun rapport avec l'énergie. On garde large sur
+  # le périmètre énergie — c'est justement là qu'on ne sait pas d'avance ce
+  # dont on aura besoin, comme l'ont montré les modes MPPT le 03/09 — et on
+  # laisse le reste de côté.
+  include:
+    entity_globs:
+      - sensor.victron_*
+      # Les capteurs propres a la borne (13 entites) : compteur cumulatif,
+      # energie et duree de la derniere session, statut. Absents jusqu'au
+      # 06/09, ce qui a empeche d'etablir la semantique de
+      # `last_session_energy` quand elle a fausse une cloture de session.
+      - sensor.evcs_*
+      - sensor.mppt_*
+      - sensor.airtria_*
+      - sensor.gx_device_*
+      - sensor.sun_solar_elevation
+      - binary_sensor.victron_*
+      - switch.edf_*
+      - switch.gx_device_*
+      - number.gx_device_*
+      - input_boolean.victron_evcs_*
+      - input_boolean.evcs_*
+      - input_number.victron_evcs_*
+      - input_number.evcs_*
+      - input_select.victron_evcs_*
+      - input_text.victron_evcs_*
+      - input_text.evcs_*
+  exclude:
+    entities:
+      # Une clé d'API n'a rien à faire dans une base de séries temporelles.
+      - input_text.evcs_balance_forecast_api_key
+  tags:
+    installation: airtria
+
+recorder:
+  purge_keep_days: 90
+  exclude:
+    entities:
+      # Clé d'API : aucune raison de l'archiver 90 jours dans la base.
+      - input_text.evcs_balance_forecast_api_key
+
+# Load frontend themes from the themes folder
+frontend:
+  themes: !include_dir_merge_named themes
+
+automation: !include automations.yaml
+script: !include scripts.yaml
+scene: !include scenes.yaml
+
+#gestion MQTT
+mqtt:
+  sensor:
+    - name: "Victron Max Charge Current Setting"
+      unique_id: victron_max_charge_current_setting
+      state_topic: "N/c0619ab34ac5/settings/0/Settings/SystemSetup/MaxChargeCurrent"
+      value_template: "{{ value_json.value if value_json is defined and value_json.value is defined }}"
+      json_attributes_topic: "N/c0619ab34ac5/settings/0/Settings/SystemSetup/MaxChargeCurrent"
+      unit_of_measurement: "A"
+      icon: mdi:current-dc
+      state_class: measurement
+
+    - name: "Victron Max Charge Voltage Setting"
+      unique_id: victron_max_charge_voltage_setting
+      state_topic: "N/c0619ab34ac5/settings/0/Settings/SystemSetup/MaxChargeVoltage"
+      value_template: "{{ value_json.value if value_json is defined and value_json.value is defined }}"
+      json_attributes_topic: "N/c0619ab34ac5/settings/0/Settings/SystemSetup/MaxChargeVoltage"
+      unit_of_measurement: "V"
+      icon: mdi:flash
+      state_class: measurement
+
+    - name: "Victron Battery SoC Live"
+      unique_id: victron_battery_soc_live
+      state_topic: "N/c0619ab34ac5/battery/512/Soc"
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      unit_of_measurement: "%"
+      device_class: battery
+      state_class: measurement
+      expire_after: 600
+      # force_update: true   # optionnel (je te conseille de le laisser commenté au début)
+
+    - name: "Victron Battery SoC"
+      unique_id: victron_battery_soc
+      state_topic: "N/c0619ab34ac5/battery/512/Soc"
+      unit_of_measurement: "%"
+      device_class: battery
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      expire_after: 600
+      force_update: true
+      state_class: measurement
+
+    - name: "Victron Battery Voltage"
+      unique_id: victron_battery_voltage
+      state_topic: "N/c0619ab34ac5/battery/512/Dc/0/Voltage"
+      unit_of_measurement: "V"
+      device_class: voltage
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      state_class: measurement
+
+    - name: "Victron Battery Current"
+      unique_id: victron_battery_current
+      state_topic: "N/c0619ab34ac5/battery/512/Dc/0/Current"
+      unit_of_measurement: "A"
+      device_class: current
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      state_class: measurement
+
+    - name: "Victron Battery Power"
+      unique_id: victron_battery_power
+      state_topic: "N/c0619ab34ac5/battery/512/Dc/0/Power"
+      unit_of_measurement: "W"
+      device_class: power
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      state_class: measurement
+
+    - name: "Victron Battery Temperature"
+      unique_id: victron_battery_temperature
+      state_topic: "N/c0619ab34ac5/battery/512/Dc/0/Temperature"
+      unit_of_measurement: "°C"
+      device_class: temperature
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      state_class: measurement
+
+    - name: "Victron PV Power (system)"
+      unique_id: victron_pv_power
+      state_topic: "N/c0619ab34ac5/system/0/Dc/Pv/Power"
+      unit_of_measurement: "W"
+      device_class: power
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      state_class: measurement
+
+    - name: "Victron VE.Bus DC Power (system)"
+      unique_id: victron_vebus_dc_power
+      state_topic: "N/c0619ab34ac5/system/0/Dc/Vebus/Power"
+      unit_of_measurement: "W"
+      device_class: power
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      state_class: measurement
+
+    - name: "Victron Grid Power L1"
+      unique_id: victron_grid_power_l1
+      state_topic: "N/c0619ab34ac5/system/0/Ac/Grid/L1/Power"
+      unit_of_measurement: "W"
+      device_class: power
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      state_class: measurement
+
+    - name: "Victron Consumption Power L1"
+      unique_id: victron_consumption_power_l1
+      state_topic: "N/c0619ab34ac5/system/0/Ac/Consumption/L1/Power"
+      unit_of_measurement: "W"
+      device_class: power
+      value_template: "{{ value_json.value | float(0) if value_json is defined and value_json.value is defined }}"
+      state_class: measurement
+
+    - name: "Victron VE.Bus State (raw)"
+      unique_id: victron_vebus_state_raw
+      state_topic: "N/c0619ab34ac5/vebus/276/State"
+      value_template: "{{ value_json.value | int(0) if value_json is defined and value_json.value is defined }}"
+
+    - name: "Victron VE.Bus MainState (raw)"
+      unique_id: victron_vebus_mainstate_raw
+      state_topic: "N/c0619ab34ac5/vebus/276/VebusMainState"
+      value_template: "{{ value_json.value | int(0) if value_json is defined and value_json.value is defined }}"
+
+    - name: "Victron VE.Bus ChargeState (raw)"
+      unique_id: victron_vebus_chargestate_raw
+      state_topic: "N/c0619ab34ac5/vebus/276/VebusChargeState"
+      value_template: "{{ value_json.value | int(0) if value_json is defined and value_json.value is defined }}"
+
+    - name: "Victron AC-in1 available"
+      unique_id: victron_acin1_available
+      state_topic: "N/c0619ab34ac5/vebus/276/Ac/State/AcIn1Available"
+      value_template: "{{ value_json.value | int(0) if value_json is defined and value_json.value is defined }}"
+
+template:
+  - sensor:
+      - name: "Victron mode (derived)"
+        unique_id: victron_mode_derived
+        state: >-
+          {% set acin = states('sensor.victron_ac_in1_available')|int(0) %}
+          {% set gridw = states('sensor.victron_grid_power_l1')|float(0) %}
+          {% set batw  = states('sensor.victron_battery_power')|float(0) %}
+
+          {# Seuils anti-bruit #}
+          {% set GRID_ON_W = 50 %}
+          {% set BAT_CHG_W = 150 %}
+          {% set BAT_DIS_W = -150 %}
+
+          {% if acin == 0 %}
+            {% if batw < BAT_DIS_W %}
+              Inverting (on battery)
+            {% else %}
+              Off-grid (idle/low load)
+            {% endif %}
+          {% else %}
+            {% if batw > BAT_CHG_W %}
+              Charging (AC-in)
+            {% elif gridw > GRID_ON_W %}
+              On grid (passthru/import)
+            {% else %}
+              Grid available (low import)
+            {% endif %}
+          {% endif %}
+
+      - name: Victron EVCS Status FR
+        unique_id: victron_evcs_status_fr
+        icon: mdi:ev-station
+        state: >-
+          {% set raw = states('sensor.victron_evcs_status_raw') | string %}
+          {% set vehicle = is_state('binary_sensor.victron_evcs_vehicle_connected', 'on') %}
+          {% set charging_switch = is_state('switch.victron_evcs_charging', 'on') %}
+          {% set evcs_power = states('sensor.victron_evcs_ac_power') | float(0) %}
+
+          {% if raw == '0' and not vehicle %}
+            EV déconnecté
+          {% elif raw == '2' %}
+            Charge en cours
+          {% elif raw == '6' and vehicle %}
+            Véhicule connecté - en attente
+          {% elif charging_switch or evcs_power > 100 %}
+            Charge en cours
+          {% elif raw in ['unknown', 'unavailable', '', 'none'] %}
+            Inconnu
+          {% else %}
+            Inconnu ({{ raw }})
+          {% endif %}
+        attributes:
+          raw_status: "{{ states('sensor.victron_evcs_status_raw') }}"
+          vehicle_connected: "{{ states('binary_sensor.victron_evcs_vehicle_connected') }}"
+          charging_switch: "{{ states('switch.victron_evcs_charging') }}"
+          evcs_power_w: "{{ states('sensor.victron_evcs_ac_power') }}"
+
+      - name: Victron EVCS mode FR
+        unique_id: victron_evcs_mode_fr
+        icon: mdi:tune
+        state: >
+          {% set raw = states('sensor.victron_evcs_mode_raw') | string %}
+          {% set source = states('sensor.victron_evcs_mode') | string %}
+          {% set label = source | lower %}
+
+          {% if raw == '0' or label in ['manuel', 'manual'] %}
+            Manuel
+          {% elif raw == '1' or label in ['auto', 'automatic', 'automatique'] %}
+            Auto
+          {% elif raw == '2' or label in ['planifié', 'planifie', 'scheduled', 'schedule'] %}
+            Planifié
+          {% elif source not in ['unknown', 'unavailable', '', 'none'] %}
+            {{ source }}
+          {% else %}
+            Inconnu
+          {% endif %}
+        attributes:
+          raw_mode: "{{ states('sensor.victron_evcs_mode_raw') }}"
+          source_mode: "{{ states('sensor.victron_evcs_mode') }}"
+
+sensor:
+  - platform: filter
+    name: "Victron PV Power 10m Avg"
+    unique_id: victron_pv_power_10m_avg
+    entity_id: sensor.victron_pv_power_system
+    filters:
+      - filter: time_simple_moving_average
+        window_size: "00:10:00"
+        precision: 0
+
+
+lovelace:
+  dashboards:
+    bilan-energetique:
+      mode: yaml
+      title: Bilan énergétique
+      icon: mdi:scale-balance
+      show_in_sidebar: true
+      filename: dashboards/bilan_energetique.yaml
+
+    victron-master:
+      mode: yaml
+      title: Victron Master
+      icon: mdi:home-battery
+      show_in_sidebar: true
+      filename: dashboards/victron_master.yaml
+
+    victron-debug:
+      mode: yaml
+      title: Victron Debug
+      icon: mdi:bug
+      show_in_sidebar: true
+      require_admin: true
+      filename: dashboards/victron_debug.yaml
+
+    test-cards:
+      mode: yaml
+      title: Test Cards
+      icon: mdi:test-tube
+      show_in_sidebar: true
+      require_admin: true
+      filename: dashboards/test_cards.yaml
+
+    victron-mobile:
+      mode: yaml
+      title: Victron Mobile
+      icon: mdi:cellphone
+      show_in_sidebar: true
+      filename: dashboards/victron_mobile.yaml
+
+    evcs-mobile:
+      mode: yaml
+      title: EVCS Mobile
+      icon: mdi:car-electric
+      show_in_sidebar: true
+      filename: dashboards/evcs_mobile.yaml
+
+    evcs-master:
+      mode: yaml
+      title: EVCS Master
+      icon: mdi:car-electric
+      show_in_sidebar: true
+      filename: dashboards/evcs_master.yaml
+
+    ecs-pilotage-premium:
+      mode: yaml
+      title: ECS Pilotage Premium
+      icon: mdi:water-boiler
+      show_in_sidebar: true
+      filename: dashboards/ECS_PILOTAGE_PREMIUM.yaml
+
+    ecs-debug-reglages-premium:
+      mode: yaml
+      title: ECS Debug Réglages Premium
+      icon: mdi:bug
+      show_in_sidebar: true
+      require_admin: true
+      filename: dashboards/ECS_DEBUG_REGLAGES_PREMIUM.yaml
+
+    garage-premium-pilotage:
+      mode: yaml
+      title: Garage Premium Pilotage
+      icon: mdi:garage-variant
+      show_in_sidebar: true
+      filename: dashboards/GARAGE_PREMIUM_PILOTAGE.yaml
+
+    garage-debug-premium:
+      mode: yaml
+      title: Garage Debug Premium
+      icon: mdi:bug
+      show_in_sidebar: true
+      require_admin: true
+      filename: dashboards/GARAGE_DEBUG_PREMIUM.yaml
+
+    garage-mobile:
+      mode: yaml
+      title: Garage Mobile
+      icon: mdi:cellphone
+      show_in_sidebar: true
+      filename: dashboards/GARAGE_MOBILE.yaml
+
+    sdb-premium-pilotage:
+      mode: yaml
+      title: SDB Premium Pilotage
+      icon: mdi:shower-head
+      show_in_sidebar: true
+      filename: dashboards/SDB_PREMIUM_PILOTAGE.yaml
+
+    sdb-debug-premium:
+      mode: yaml
+      title: SDB Debug Premium
+      icon: mdi:bug
+      show_in_sidebar: true
+      require_admin: true
+      filename: dashboards/SDB_DEBUG_PREMIUM.yaml
+
+
+
+# ===== NOUVELLE ENTITÉ V2.0 (Stratégie EVCS) =====
+input_select:
+  victron_evcs_strategy:
+    name: Stratégie EVCS Surplus
+    options:
+      - auto_solar
+      - auto_solar_plus
+      - force_grid_now
+      - force_charge_now
+      - stop
+    initial: "auto_solar_plus"
+